empty cell
Manual on Uniform Traffic Control Devices (MUTCD) arrows logo

Full-size image of Figure 6H-33

Figure 6H-33. Stationary Road Closure on Divided Highway (TA-33)

This figure illustrates two examples of stationary road closure on a divided highway. A legend under the figure states that this is Typical Application 33. A note states "Note: See Tables 6H-2 and 6H-3 for the meaning of the symbols and/or letter codes used in this figure."

This figure shows two vertical examples of the two northbound lanes of a four-lane divided highway. Upward-pointing black arrows in the lanes denote the direction of traffic. A shoulder is shown to the left and right of each example. The shoulders are shown separated from the right lanes by a solid white line and from the left lanes by a solid yellow line. The two lanes in each example are shown separated from each other by a broken white line.

The first example is identified at the bottom of the figure as LONG-TERM AND INTERMEDIATE. At the bottom of the figure and to the outside of both the left and right shoulders, a black inverted "T" is shown denoting a sign. The sign is shown as a diamond-shaped orange sign with a black border and the words "ROAD WORK 1 MILE" in black or its metric alternate "1.6 km." Beyond the sign, at a dimensioned distance C, another sign is shown to the outside of both shoulders. It is shown as a diamond-shaped orange sign with a black border and the words "RIGHT LANE CLOSED 1/2 MILE" in black or its metric alternate "800 m." Beyond this sign, at a dimensioned distance B, another sign is shown to the outside of both shoulders. It shows a thick, vertical straight line on the left; a thick, vertical line on the right that angles toward the left half way up; and a thin, short vertical dotted line between them that is the length of the vertical section of the line on the right, denoting a lane ends. Beyond this sign, a series of orange squares, denoting channelizing devices, is shown beginning at the far right edge of the right shoulder and tapering to the left to the white line separating the shoulder from the right lane. A leader arrow to a note states "Shoulder taper (see Note 3)." At the end of the shoulder taper, a horizontal rectangular black arrow panel with a yellow directional arrow pointing to the left is shown across the right shoulder. The arrow panel is shown at a dimensioned distance A from the lane ends symbol sign.

At this point, a series of channelizing devices is shown continuing to taper to the left to the broken white line for a dimensioned distance L. Just to the left of the devices for the length of the taper, a solid temporary white edge line is shown. The channelizing devices then are shown continuing straight along the broken white line through an undimensioned buffer space labeled optional. Just to the left of the channelizing devices, a temporary solid white edge line is shown on the pavement for the same distance. At the end of the buffer space, a vertical rectangle with black and white diagonal stripes is shown, denoting a work space. The channelizing devices are shown continuing along the left side of the work space adjacent to the temporary white edge line. Beyond the work space, the devices are shown beginning to taper to the right again and continuing to the solid white line separating the right lane from the shoulder for a dimensioned distance of 30 m (100 ft) labeled optional. The temporary white edge line is shown just to the left of the devices as they continue past the work space and then taper to the right. Beyond the end of the taper at a dimensioned distance of 150 m (500 ft) and to the outside of both shoulders, a horizontal rectangular orange sign with a black border is shown with the words "END ROAD WORK" in black.

The second example is identified at the bottom of the figure as SHORT-TERM. At the bottom of the figure and to the outside of both the left and right shoulders, a black inverted "T" is shown denoting a sign. The sign is shown as a Road Work 1 Mile sign or its metric alternate "1.6 km." Beyond the sign, at a dimensioned distance C, another sign is shown to the outside of both shoulders. It is shown as a Right Lane Closed 1/2 Mile sign or its metric alternate "800 m." Beyond this sign, at a dimensioned distance B, another sign is shown to outside of both shoulders. The sign is shown as a lane ends symbol sign with the right lane tapering to the left. Beyond this sign, a series of channelizing devices is shown beginning at the far right edge of the right shoulder and tapering to the left to the white line separating the shoulder from the right lane. A leader arrow to a note states "Shoulder taper (see Note 3)." At the end of the shoulder taper, a horizontal rectangular black arrow panel with a yellow directional arrow pointing to the left is shown across the right shoulder. The arrow panel is shown as a dimensioned distance A from the lane ends symbol sign.

At this point, a series of channelizing devices is shown continuing to taper to the left to the broken white line for a dimensioned distance L. The channelizing devices then are shown continuing straight along the broken white line through an undimensioned buffer space labeled optional. At the end of the buffer space, a work vehicle with a truck-mounted attenuator labeled optional is shown in advance of a work space. The channelizing devices are shown continuing and ending at the end of the work space. Beyond the work space, at a dimensioned distance of 1500 m (500 ft), an End Road Work sign is shown to the outside of both shoulders.

Back to Chapter 6H