empty cell
Manual on Uniform Traffic Control Devices (MUTCD) arrows logo

Full-size image of Figure 10D-4

Figure 10D-4. Example of Pedestrian Gate Placement with Pedestrian Gate Arm

This figure illustrates an example of pedestrian gate placement with a pedestrian gate arm.

The figure shows a post-mounted flashing-light signal with two red lights shown mounted in a horizontal line and a red and white diagonally striped automatic gate assembly. A rounded-top audible device is shown mounted on top of the post. A white crossbuck sign with the words "RAILROAD CROSSING" in black is shown mounted on the post below the audible device and above the post-mounted lights.

The automatic gate is shown in the horizontal position to the left of the post, extending across the curb and roadway. The automatic gate arm is shown with 45-degree diagonal alternating red and white stripes and three red lights along the top edge. The pedestrian gate is shown in the horizontal position to the right of the post, extending across the sidewalk. This gate also is shown with diagonal red and white stripes but is shorter than the automatic gate and is shown with only one red light along the top edge.

The base of the post assembly is shown as a dimension of 100 mm (4 in) MAX. thick. The distance from the outside edge of the post-mounted light to the beginning of the roadway beyond the curb is shown as a dimension of 0.6 m (2 ft) with the note: "For locating this reference line at other than curb section installation, see Section 8D.01."

Back to Chapter 10D