empty cell
Manual on Uniform Traffic Control Devices (MUTCD) arrows logo
Knowledge bar

2009 Edition Part 6 Figure 6F-4. Warning Signs and Plaques in Temporary Traffic Control Zones (Sheet 3 of 3)

Full-size image of Figure 6F-4, Sheet 3

Figure 6F-4. Warning Signs and Plaques in Temporary Traffic Control Zones (Sheet 3 of 3)

Sheet 3 contains 31 figures.

W14-3 is shown as a pennant-shaped orange isosceles triangle with a black border and legend. Its longer axis is shown as horizontal and pointing to the right with the words "NO PASSING ZONE" on three lines.

W20-1 is shown as a diamond-shaped sign with the words "ROAD WORK 1000 FT" on three lines. A note states: "An optional STREET WORK word message sign is shown in the "Standard Highway Signs" book."

W20-2 is shown as a diamond-shaped sign with the words "DETOUR 1000 FT" on two lines.

W20-3 is shown as a diamond-shaped sign with the words "ROAD CLOSED 1000 FT" on three lines. A note states: "An optional STREET CLOSED word message sign is shown in the "Standard Highway Signs" book."

W20-4 is shown as a diamond-shaped sign with the words "ONE LANE ROAD 1000 FT" on three lines.

W20-5 is shown as a diamond-shaped sign with the words "RIGHT LANE CLOSED 1/2 MILE" on three lines.

W20-5a is shown as a diamond-shaped sign with the words "RIGHT TWO LANES CLOSED 1/2 MILE" on four lines.

W20-7 is shown as a diamond-shaped sign. It shows the symbol of a silhouette of a person standing with the arm to the left (facing the viewer) extended horizontally away from the body and extending a flag staff horizontally with the flag hanging down. The free arm is shown bent with the palm above shoulder level. A note states: "An optional FLAGGER (W20-7a) word message sign is shown in the "Standard Highway Signs" book."

W16-2P is shown as a horizontal rectangular plaque with the words "500 FEET" on two lines. It is shown mounted below the W20-7 sign.

W21-1 is shown as a diamond-shaped sign. It shows the symbol of a silhouette of a person holding a shovel and digging.

W21-2 is shown as a diamond-shaped sign. It shows the words "FRESH OIL" on two lines. A note states: "An optional FRESH TAR word message sign is shown in the "Standard Highway Signs" book."

W21-3 is shown as a diamond-shaped sign. It shows the words "ROAD MACHINERY AHEAD" on three lines.

W21-4 is shown as a horizontal rectangular sign. It shows the words "SLOW MOVING VEHICLE" on two lines.

W21-5 is shown as a diamond-shaped sign. It shows the words "SHOULDER WORK" on two lines.

W21-5b is shown as a diamond-shaped sign. It shows the words "RIGHT SHOULDER CLOSED 1000 FT" on four lines.

W21-5a is shown as a diamond-shaped sign. It shows the words "RIGHT SHOULDER CLOSED" on three lines.

W21-6 is shown as a diamond-shaped sign. It shows the words "SURVEY CREW" on two lines.

W21-7 is shown as a diamond-shaped sign. It shows the words "UTILITY WORK AHEAD" on three lines.

W21-8 is shown as a diamond-shaped sign. It shows the words "MOWING AHEAD" on two lines.

W22-1 is shown as a diamond-shaped sign. It shows the words "BLASTING ZONE AHEAD" on three lines.

W22-2 is shown as a horizontal rectangular sign. It shows the words "TURN OFF 2-WAY RADIO AND CELL PHONE" on four lines.

W22-3 is shown as a horizontal rectangular sign. It shows the words "END BLASTING ZONE" on three lines.

W23-1 is shown as a horizontal rectangular sign. It shows the words "SLOW TRAFFIC AHEAD" on three lines.

W23-2 is shown as a diamond-shaped sign. It shows the words "NEW TRAFFIC PATTERN AHEAD" on four lines.

W24-1 is shown as a diamond-shaped sign. It shows a vertical arrow that angles to the right, then proceeds straight, then angles back to the left, and then straight again.

W24-1cP is shown as a horizontal rectangular plaque. It shows the words "ALL LANES" on two lines. It is shown mounted below the W24-1 sign.

W24-1a is shown as a diamond-shaped sign. It shows two side by side vertical arrows that angle to the right, then proceed straight, then angle back to the left, and then straight again.

W24-1b is shown as a diamond-shaped sign. It shows three side by side vertical arrows that angle to the right, then proceed straight, then angle back to the left, and then straight again.

G20-1 is shown as a horizontal rectangular sign. It shows the words "ROAD WORK NEXT 5 MILES" on two lines.

G20-2 is shown as a horizontal rectangular sign. It shows the words "END ROAD WORK" on two lines.

G20-4 is shown as a horizontal rectangular sign. It shows the words "PILOT CAR FOLLOW ME" on two lines.

Back to: Sheet 1 | Sheet 2

Back to Chapter 6F