empty cell
Manual on Uniform Traffic Control Devices (MUTCD) arrows logo
Knowledge bar

2009 Edition Part 1. General

PART 1 TABLE OF CONTENTS
CHAPTER 1A. General
Section 1A.01 Purpose of Traffic Control Devices
Section 1A.02 Principles of Traffic Control Devices
Section 1A.03 Design of Traffic Control Devices
Section 1A.04 Placement and Operation of Traffic Control Devices
Section 1A.05 Maintenance of Traffic Control Devices
Section 1A.06 Uniformity of Traffic Control Devices
Section 1A.07 Responsibility for Traffic Control Devices
Section 1A.08 Authority for Placement of Traffic Control Devices
Section 1A.09 Engineering Study and Engineering Judgment
Section 1A.10 Interpretations, Experimentations, Changes, and Interim Approvals
Section 1A.11 Relation to Other Publications
Section 1A.12 Color Code
Section 1A.13 Definitions of Headings, Words, and Phrases in this Manual
Section 1A.14 Meanings of Acronyms and Abbreviations in this Manual
Section 1A.15 Abbreviations Used on Traffic Control Devices

 

PART 1 FIGURES
Figure 1A-1 Process for Requesting and Conducting Experimentations for New Traffic Control Devices
Figure 1A-2 Process for Incorporating New Traffic Control Devices into the MUTCD

 

PART 1 TABLES
Table 1A-1 Acceptable Abbreviations
Table 1A-2 Abbreviations that Shall be Used Only on Portable Changeable Message Signs
Table 1A-3 Unacceptable Abbreviations

Back to Top